SPECIFICATIONS

Lighting Distance: > 500 meters

Brand Name: LetonPower

Certification: CCC

Model Number: W1

Support Dimmer: > 8 files

Charger: Multifunctional Charging

Waterproof: Yes

Origin: Mainland China

Item Type: FLASHLIGHTS

Lumen: other

Switch Mode: Zoom In

Zoom: No

Model of LED Beads: L2

Body Material: aluminum

Focal Length: Non-adjustable

Wattage: 60W

Light Source: HID

Choice: yes

semi_Choice: yes

W1 is a split professional diving lighting introduced by LetonPower, with high brightness, long battery life, flexible use of characteristics. Suitable for diving in a variety of professional fields. like technical diving, underwater photography, shipwreck diving, underwater engineering, cave exploration.

Professional technical specifications

Model: W1

Materials:Aerospace and aluminum alloys,

Technology:high-quality type III military hard anode oxidation anti-grinding surface,spring, circuit gold plated

Switch:Next-generation magnetron switch design

Wicks: 6xL2 LED 50000 hours of life Light intensity: 10000 luminescies

Beam distance: 200m

Waterproof:Up to 200m underwater

Power supply: 3 x 18650 lithium battery (without battery)

size:

Head：65mm (diameter) x 90mm(length)  Battery case：52mm (deep) x 142mm (L)  Bracket： 105mm (long) x 44mm (W) x97mm (high). Waterproof cable：1350mm (L)

Operating:

*On / Off: press the switch for 0.5 second to turn on, press the switch for 3 second to turn off

*Change Modes: click the switch to cycle through (Low-Mid - high-MAX Bright)

Maintenance Tips:

1.You need to tighten the body of the flashlight and the lamp head.

2:Note that the flashlight is very powerful and requires a lot of current. It is recommended to use a power battery, the battery discharge rate can reach 3C/ 5C If your battery current is very small, the white light of the flashlight will not work.
3:Appearance precautions, the flashlight supports the use of a pointed battery,the flat battery cannot touch the circuit board, and the flashlight cannot be used normally

4.Do not shine the light beam directly into eyes.

5.Do not installing the battery reverse polarity.

6.After use you should wash your diving lights thoroughly in fresh water along with the rest of your equipment.

7.Clean, lubricate and inspect the O-rings,that would better for the flashlight's long-term use.

8.Clean the battery and electrical contacts.

9.Store your scuba diving lights without their batteries to prevent any possible corrosion from battery leakage.

10.Always recharge the battery when the light goes dim, thus overwork of batteries can be avoided and lifetime could be extended.

11.Store your dive lights in a cool dry place out of direct sunlight.

What do you get?

Package A

1*W1 Diving Flashlight(NO  battery NO Charger)

Package B

1 * W1 Diving Flashlight( NO Charger)

3 *3.7V 26650 Battery

Package C

1 * W1 Diving Flashlight

2 * 3.7V 26650 Battery

1 * Charger