Selling Point:

1. flashlight has a special structure and is installed with professional tools. Demolition by yourself may damage the flashlight.
2. Please check the waterproof position of the flashlight tightly before diving. If it is loose, please tighten it before use.
3. After diving, please rinse the flashlight surface and the switch. When the switch is slightly stuck, you can use the detergent to clean. After the flashlight is dry, you need to use the waterproof lubricant again at the screw interface of the flashlight.
4. When transporting or no using, turn off the light or turn it counterclockwise one turn to prevent the light from being accidentally turned on.
5. Charge the battery in time after each use. If it is

Product description:

1. Light source: XHP70.2
2. Brightness: 6000LM
3.LED light : Yellow Light / White Light
4. Switch control: The charge level is displayed on the button .
5. Power display: power is higher than 50%
Power 50% - 20% red light
power is lower than 5%
6.4 Modes: High-medium-low-strobe
7. Drive: Buck constant current stabilization circuit Conversion rate 96%
8. Function: Low voltage protection function ;Battery anti-reverse function; Overheat protection function
9. Material: 6061 aluminum alloy Pure copper base
10. Halo: 6061 aluminum alloy CNC production Smooth surface plating Optical conversion rate 93%
11. Surface: Anode hard oxidation (anti-seawater corrosion)
12. Size: length 318MM ;head diameter 69MM; tail diameter 30mm
13. Diving depth: 100 meters (Diving)
14. Weight: about 395G in air (bare flashlight) / about 210G in water (bare flashlight)
15. Battery type: 26650 * 3 sections