All stock in our shop at East Tamaki, Auckland.

Reusable resin is a reusable thermoplastic polymer with a low melting point. The pellets fuse together, soften and turn transparent when heated to over 90°C allowing users to easily shape the polymer by hand! It hardens to a solid, white, non-brittle, strong material that truly has unlimited possibilities. It has no shelf-life and is fully biodegradable. Compatible with Artmore colouring liquid dye.

✔Heat in hot water over 90°C, Heat to reshape or re-use
✔Hardens in minutes
✔Easily shape the polymer by hand
✔ Reusable
✔ Strong
✔ Biodegradable

How to use:

1. Pour the reusable resin into a mixing cup first, then pour in hot water at 90-100 degrees.
2. You can add Artmore liquid dye after the resin melted.
3. Once the reusable resin melted, it can be taken out. Allow to cool slightly and used. Be careful as it may be hot at high temperatures.
4. Mould by hand and allow to harded
5. If you're not satisfied with the shape, you can reheat it and use it again. You can use an oven to avoid bubbles.

Caution: Children 8+ only, should use this product by adult supervision.