![ePRO Combi Inverter Charger 2000W/12V w/ Remote - Action Outdoors Kiwi](http://actionoutdoors.kiwi/cdn/shop/files/advance-trident-inverters-12v-24v-to-230v-default-title-epro-combi-inverter-charger-2000w-12v-w-remote-45949613113629.jpg?v=1723932435&width=450)
Advance Trident
ePRO Combi Inverter Charger 2000W/12V w/ Remote
Sent from NZ Supplier (1-2 Days)
ePRO Combi Inverter Charger 2000W/12V w/ Remote - All-in-one combination of a DC to AC true sinewave inverter
ePRO Combi Inverter Charger 2000W/12V w/ Remote
The main task of the ePRO Combi Inverter Charger is to act as an uninterruptible AC power supply (UPS).
In case of a grid/generator failure or disconnection, the ePRO Combi immediately stops charging the battery, releases the AC transfer switch and activates the inverter which takes over the supply to the connected loads.
All this is achieved so fast, that even very critical loads like computers will continue to operate without any problems.
In case the grid/generator is reconnected again and the voltage and frequency are within acceptable limits, the ePRO Combi activates the AC transfer switch and battery charger again, while deactivating the inverter.
The connected loads are now supplied again by the grid/generator without any interruption.
Available in 12v, 24v or 48v models and ranging in sizes from 1600-3500w inverter output and 35-120A charger output, the ePRO Combi has a unit to suit nearly any application.
Additionally, the ePRO Inverter Charger offers features like:
AC Input Power Boost, which temporarily assists weak AC input sources when the connected load needs more power than available from the grid or generator.
AC Input Current Limit, which limits the maximum current consumed from the AC input source by the ePRO Combi. This limit is user adjustable.
Power Factor Corrected AC Input, which optimizes energy efficiency and makes sure that the maximum amount of charging current is available from your AC source.
Intelligent 4-stage charge programs, user programmable to fit any battery type.
Fully programmable inverter, transfer switch and battery charger parameters, using the Dashboard for Windows software.
Programmable alarm relay, for optimal control of external devices like generator starting or selective load disconnection.
Freely assignable trigger input, which allows the user to control the ePRO Combi by external events.
Temperature controlled fans, to guarantee silent operation under less than full load conditions.
Temperature compensated battery charging, using the standard supplied battery temperature sensor for maximum battery lifetimes.
Specifications
Model | EPC 2000-12 | EPC 3000-12 | EPC 3500-24 |
---|---|---|---|
Output power (1) Pnom | 1800W | 2600W | 2800W |
P10minutes | 2100W | 3200W | 3800W |
Psurge | 4000W | 5000W | 6500W |
Output voltage / frequency | 230 Vac ± 2% / 50 Hz ± 0.05% | ||
Output waveform | 230 Vac ± 2% / 50 Hz ± 0.05% | ||
Input voltage (± 3% tolerance): Nominal | 12V | 12V | 24V |
Range | 10.5 (2) – 16 Vdc | 10.5 (2) – 16 Vdc | 21 (2) – 32 Vdc |
Maximum efficiency | 92% | 92% | 93% |
No load power consumption (2) [ASB] | <20 W [3.5 W] | <20 W [3.5 W] | <20 W [4.0 W] |
Charger stage | |||
AC input voltage | 185 – 270 Vac / 45 – 65 Hz / PF > 0.95 | ||
Maximum continuous charging current (4) | 80A | 120A | 70A |
Standard charge voltage (bulk / float @ 25°C) | 14.3V / 13.3V (programmable) | 14.3V / 13.3V (programmable) | 28.6V / 26.6V (programmable) |
Charge algorithm | IUoUoP, intelligent 4-stage, temperature compensated (programmable) | ||
AC Transfer Switch | |||
Maximum continuous current | 30 Ams | ||
Transfer time (typical) | 0 ms (inverter to mains) / <5 ms (mains to inverter) | ||
General | |||
ePROLink enabled | Yes | ||
Protections | high/low battery voltage, high temperature, overload, short circuit, high ripple voltage and low AC input voltage | ||
DC connections | M10 bolt terminals | ||
AC connections | Screw terminals | ||
Enclosure body size | 370 x 431 x 132mm | ||
Total weight | 18.5 Kg | ||
Protection class / operating temp. / storage temp. | IP21 / -20°C.. +50°C / -40°C.. +80°C (humidity max. 95% non-condensing) | ||
Standards | Complies with IEC 60335-2-29 including Australian deviations. | ||
Note: Specifications subject to change without notice. |
Accessories
Enerdrive Part # | Description | |
---|---|---|
5095500 | ![]() |
Universal Remote Control and Cable |
5092120 | ![]() |
ePRO Link cable to connect to the ePRO Universal Remote Control or to a Windows device |
5092120 | ![]() |
Temperature Sensor (Included) |
5055630 | ![]() |
TBS Alarm expander board to suit ePro—expands alarm relays from 1 to 4 |
ePRO Combi 1600 to 3500 User Manual
ePRO Combi 2000 – 3500 Installation Guide
Universal Remote Control Owner’s Manual
Please note this is Subject to stock and is not sold in our store - It is Shipped from a seure Location in USA: 2 days DHL price or 1-2 weeks Standard post - Online Orders Only
On-Site Installation for this product is Available for $100 an Hour + GST - Please email us to book sales@actionoutdoors.kiwi
3/12/18-V
YOUR ONE STOP SHOP
Action Outdoors leads the marine industry with high-quality commercial fishing equipment. Browse our wide selection of marine electronics, boating gear, fishing nets, RV equipment, ropes, yacht braids, and more – suitable for everything from luxury yachts to kayaks. Don't miss our amazing deals and special prices!