ATEMPOWER 100Ah 12V Lithium Battery LiFePO4 Deep Cycle Rechargeable Marine 4WD

A Grade Cell: This battery is composed of A grade cells, and the terminals of the cells are bolted that deliver higher amperage loads and better current conductivity.
Longer Lifespan: This LiFePO4 battery can deliver up to 2,000 rounds, several times the life of a lead-acid counterparts.
Higher Usable Capacity: AGM are recommended to be discharged to 50% of the capacity while ATEM POWER LiFePO4 batteries can be discharged to 80-90%.
High Quality BMS: It allows 100A continuous discharge and provide voltage/ temperature monitoring and smart balancing to add rigid strength to each cell.
High Power Output: It has been designed to allow sufficient discharge amp rating to power high power appliances such as a microwave or coffee machine.
Run in Parallel or Series: Designed to allow for up to 2 batteries in series or 2 batteries in parallel to achieve desired voltage and amp-hour capacity of the bank.
Faster Charging: Lower internal resistance allows this lithium battery to accept charge at a greater rate, allowing it to be charged and ready to use much faster.
Impeccably Lightweight: It provides 100AH that doubles the power of a lead acid battery with 1/3rd of that weight when towing or mobility is in the consideration.

Nominal Capacity: 100Ah
Nominal Voltage: 12.8V
Life Cycle: 2,000 Cycles
Charge Voltage: 10V-14.6V
Max. Continuous Charge Current(25ˇăC): 50A
Max. Continuous Discharge Current(25ˇăC): 100A
Max. Charge Current: 50A
Max. Discharge Current(<=7S): 200A
Internal Impedance: <=10megger
Charge Temperature: -20~70ˇăC
Discharge Temperature: -20~70ˇăC
Standard Operation Temperature: -20~70ˇăC
Self-discharge Rate(per month): 2%
Max. Modules in Series/Parallel: 2S/2P
Package Dimension: 41cm x 26.5cm x 30cm
Gross Weight: 13.65kg

Package:
1 x ATEM POWER 100Ah Lithium Iron Phosphate Battery
Set of Screws & Nuts
1 x User Manual