B-tec 300Amp - 12V Lifepo4 Battery Gen2

B-tec 300Amp - 12V Lifepo4 Battery Gen2

Enerdrive EPL-300BT-12v-G2 - Prod. Code EPL-300BT-12V-G2 - This lithium battery is designed and intended for use in deep cycle applications

Enerdrive EPL-300BT-12v-G2

Features

Features

ePOWER B-TEC LiFeP04 12v 300Ah Lithium Battery

Available in 12v 100Ah, 125Ah, 200Ah and 300Ah capacities and 24v 100Ah & 36v 100Ah, the ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.


Smart Phone Monitoring System

FEATURES:

ENERDRIVE B-TEC LIFEP04 12V 300AH G2 LITHIUM BATTERY

Available in 12v 300Ah capacity, the Enerdrive B-TEC G2 lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

SMARTPHONE MONITORING SYSTEM

The Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

• Battery Capacity
• Battery Voltage
• Battery Current (Amps)
• Battery State of Charge (SOC)
• Battery State of Health (SOH)
• Battery Status
• Individual Cell Voltage
• Battery Temperature
• Battery Cycles
• Battery Alarms
• Battery Event Information

BATTERY MANAGEMENT SYSTEM

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from overcharge, over-discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

SIZE & WEIGHT SAVINGS

Lithium v AGM Capacities;

• 100Ah Lithium = 160Ah AGM
• 125Ah Lithium = 200Ah AGM
• 200Ah Lithium G2 = 320Ah AGM
• 300Ah Lithium G2 = 480Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The Enerdrive B-TEC G2 battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The Enerdrive B-TEC G2 battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small watercraft, low-power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

THE NEW GENERATION 2 B-TEC

So, How does the New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery measure up against it original predecessor? Let’s have a look.

Also included for free is a metal battery tray and hold-down strap to complete the installation process.

The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. You no longer need to apply a voltage to the battery terminals to wake up the battery. Press the button and the battery will come back to life within seconds, ready to accept a charge source to rejuvenate the battery.

The new G2 also includes an RS485 communications port located on the top of the battery. This port allows integration onto other CanBus systems for data monitoring and recording.

The New Enerdrive Generation 2 (G2) B-TEC 300Ah Lithium Battery now comes with a 5-year warranty, giving you peace of mind that this product will keep you covered.

With over 8 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.

With over 4000 complete systems in operation Australia-wide, Enerdrive is regarded as the leader in lithium batteries and energy systems for Mobile, Marine and Remote applications.

Please Note; The G2 battery can be paralleled to a second G2 battery. For maximum performance and lifespan of your G2 battery, no more than 2 batteries should be connected to increase your overall capacity. Overall loads when paralleled, should not exceed the current limits of a single battery BMS.

The G2 300Ah battery can accept a maximum inverter capacity of 3000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.

If you require a battery system larger than the Enerdrive B-TEC G2 battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.

​THIS ITEM IS SHIPPED DIRECTLY FROM OUR LOCAL SUPPLIERS