
CRC
CRC ADOS Resamax Epoxy Mortar Pack 1L 4503
CRC ADOS Resamax Epoxy Mortar Pack 1L 4503
Action Outdoors Shop
1/348 Rosebank Road
Avondale
AUK
Auckland 1026
New Zealand
CRC ADOS Resamax Epoxy Mortar Pack 1L
ADOS Epoxy Mortar is a two part silica based epoxy. Once mixed, the putty can be easily moulded to form permanent watertight repairs with a smooth finish to concrete, brick, mortar and plaster. It adheres well to wet surfaces and is suitable for most underwater repairs. In cured form ADOS Epoxy Mortar is many times harder and more impact resistant than concrete, has a similar consistency and colour to new concrete, and has excellent chemical and UV resistance.
Features & Benefits
-
Permanent and super strong – Cures harder than concrete
-
Cures watertight – Suitable for repairs to submerged substrates
-
Adheres to wet surfaces – Can be applied underwater
-
Excellent cohesive properties in uncured state – Easy to work and mould, ideal when a smooth even finish is required
-
Appearance – Similar consistency and colour to new concrete
-
Non-slump – Suitable for overhead and vertical applications
-
100% solids – No shrinkage when cured
-
Resilient – Excellent resistance to chemicals and UV rays
-
Convenient to use – 1:1 formulation, ensures correct mixing each time
Product Selection Guide
-
View the ADOS Adhesive Selection Guide
Typical Properties and Characteristics
Type |
Epoxy |
Composition |
Silica based epoxy system |
Colour |
Similar to new concrete |
Minimum Temperature for Curing |
-10°C |
Service Temperature |
Continuous 80°C, Intermittent 150ºC |
Reactivation |
N/A |
Viscosity |
Paste-like |
Solids |
100% |
Hold Up |
In thick film, excellent. Has an inherent thixotropic aspect, and exhibits no slump during the cure process. |
Working Time |
Up to 20 minutes at 20°C |
Thinning |
Not required |
Clean Up |
Use ADOS Epoxy Solvent Clean Up for cleaning uncured material off utensils. Wash off skin with soap and water only. |
Compressive Strength |
97.6 MPa |
Tensile Strength |
26.8 MPa |