Roundsling - 15.0T Titan Orange 8m is engineered for the heaviest lifts in challenging environments. From construction sites to heavy fabrications, this endless (round) sling delivers dependable performance with a clear focus on safety, durability, and easy identification.

The sling is built from 100% polyester for a balance of strength, flexibility, and abrasion resistance. The Titan Orange color follows international coding, so you can quickly identify the right sling for the job in busy rigging operations, helping reduce setup time and error.

Key features

• Working Load Limit (WLL): 15 tonnes for confident, high-capacity lifts
• Length: 8 meters with a compact, flat profile
• Material: 100% polyester for excellent load distribution and wear resistance
• Flat thickness: 21 mm to optimize surface contact and reduce edge damage
• Certification: AS4497 with a Unique Identification Number for traceability and compliance
• Safety factor: 7:1 providing a robust margin for critical lifts
• International colour coding and the TITAN brand reputation for reliability in demanding applications
• Note on angle ratings: The attached international ratings chart assumes external angles; regional practices (e.g., New Zealand) may use internal angles which affect multi-leg ratings. For example, a 20-tonne load with a 60° angle on a two-leg sling yields a 1.7 load factor, with 3–4 leg configurations reaching approximately 2.6. Always refer to regionally applicable charts when planning multi-leg lifts.

Why this roundsling stands out

Unlike general-purpose slings, this 15.0T Titan Orange 8m roundsling emphasizes rigging precision and safe load distribution across the contact area. The continuous loop design eliminates pinching points and minimizes edge wear, helping extend service life under repetitive lifts. The compact 8-meter length is ideal for mid-range rigging tasks, while the 21 mm thickness adds durability without sacrificing flexibility when looping around corners or through rigging hardware.

Practical use cases

• Lifting heavy machine parts, turbines, or structural components where a long, continuous sling provides even load sharing
• Rigging operations on construction sites where quick identification by color minimizes setup time and mistakes
• Industrial maintenance tasks involving heavy equipment relocation or staged lifts
• Marine and offshore applications that demand certified, traceable gear with a clear WLL

Best practices and care

• Inspect the sling before each use for cuts, fraying, or heat damage; replace if any compromise is found
• Do not exceed the rated capacity or use with loads resting on sharp edges without protective guards
• Avoid dragging the sling on abrasive surfaces or over sharp corners; use edge protection where needed
• Do not twist, knot, shorten, or lengthen the sling mid-use
• Avoid exposure to temperatures above 90°C and storage in UV-heavy or chemically active environments
• Ensure the correct sling is used for the application and region-specific angle factors are applied

Note on shipping: This item is shipped directly from our supplier, with product specifics aligned to AS4497 and TITAN’s rigorous standards to ensure you receive a dependable, compliant lifting solution.