CRC Etch-10 300g - Red Oxide Vinly Etch Primer

#html-body [data-pb-style=GOW2HEL]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll} CRC Etch-10 is a high-performance Red Oxide Vinyl Etch Primer designed for superior adhesion and corrosion resistance on various metal surfaces (Ferrous & Non-Ferrous). CRC Etch-10 is ideal for key-coating metals, bare aluminium, galvanised metal surfaces, stainless steel, brass and copper. CRC Etch-10 can be overcoated with most standard decorative paint systems for metals. Surface Preparation: Remove signs of corrosion with a wire brush or emery paper or similar Clean surface with CRC Brakleen or similar degreaser if required Where possible, abrade surface with disc grinding, wire brush or sandpaper Application & Directions: Shake can until the agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed Apply with smooth even strokes to a clean dry surface holding can approximately 25cm from surface until desired coverage is achieved When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes

📋 Product Specifications

📄 Documentation

• 📘 Technical Data Sheet

🔬 Safety Data Sheets

• 📕 Full SDS

Source: CRC Industries NZ