Meet the Full Beam Duratorque 2200kg for 12" Electric Hubs — a purpose-built trailer suspension that redefines stability and endurance. With independent wheel control and a rugged, corrosion-protected build, it’s designed to handle heavy loads while keeping ride quality and handling precise.

Key features that set this Duratorque apart

• Independent wheel suspension — each wheel is individually sprung, so road irregularities don’t amplify through the chassis. This means smoother towing and better handling on uneven surfaces.
• Outstanding capacity — rated at 2200kg per full beam unit for single-axle applications. When used in tandem, the capacity is reduced by 25% (e.g., two 1500kg full beam Duratorques carry 2250kg together).
• Versatile braking options — suitable for non-braked or braked hubs, including hydraulic disc and electric drum brake configurations. Electric drum braked Duratorques are available in 1750kg and 2200kg capacities, giving you precise control for heavier trailers.
• Durable, corrosion-resistant construction — components are galvanised or electro zinc plated to withstand the elements, extending service life in demanding environments.
• Flexible configurations — choose between two-piece units that fit any chassis width or full-beam units (including gull wing variants) for boat trailers, allowing your boat to sit lower on the trailer.
• Practical mounting guidance — swing arms trailing is recommended; keep tandem tyre distance to a maximum of 150mm and maintain at least 120mm clearance between the top of the tyres and mudguards when new and unloaded.
• Clear ordering pathway — this part is made to order with a 6–8 week lead time. When ordering, download and fill out the axle order sheet; hub equipment is ordered separately. For full-beam orders, supply the required length measurement C & B as shown in the diagrams.

Specifications and applicability

• Carrying capacities — available in 1000kg, 1500kg, 1750kg–2200kg ranges across two-piece and full-beam types; 3000kg versions exist for full and drop beams.
• Tandem configurations — when used in tandem, total capacity is reduced by 25% (e.g., two 1500kg units = 2250kg total).
• Hubs and brakes — compatible with non-braked or braked hubs; hydraulic disc, 1500kg, 1750kg, 2200kg, and 3000kg options; electric drum brakes offered for 1750kg and 2200kg Duratorques.
• Beam types — choose between two-piece units for universal chassis widths or full-beam units; gull wing full beams are available for boat trailers to lower the boat’s deck height.
• Dimension considerations — for full-beam installations, supply precise length measurements C & B; tandem spacing between tyres should not exceed 150mm; ensure sufficient clearance from mudguards when new and unloaded (minimum 120mm).

Designed for a wide range of trailer applications, the Duratorque system is ideal for heavy utility trailers, equipment haulers, and boat trailers where robust load support and reliable braking are critical. The two independent wheel design minimizes cross-effects during loading and braking, while the galvanised finish protects against corrosion in coastal or exposed environments.

What you’ll typically use this for

• Upgrading existing trailers that demand higher load capacity without sacrificing ride quality or handling.
• Boat trailers needing a lower profile with gull wing full-beam options so boats sit closer to the deck.
• Heavy equipment trailers requiring Electric drum braking for consistent, controllable stopping power.

Part numbers and capacity options help you select the right Duratorque for your setup. For reference, these are the common configurations associated with full-beam / two-piece units and electric drum braking:

• T101046 — 1000kg to 1500kg (non-braked or disc-braked)
• T101055 — 1750kg (non-braked or disc-braked)
• T101051 — 1750kg Electric drum braked
• T101052 — 2200kg (non-braked hubs or disc-braked)
• T101068 — 3000kg (non-braked, disc, and electric braked)

When you’re ready to order, remember: this item is made to order with a 6–8 week lead time. Download the axle order sheet, complete the details, and note that hub equipment is ordered separately. If you’re specifying a full-beam unit, provide the exact C & B measurements shown in the diagram to ensure a precise fit.

Axle Order Sheet (Adobe PDF) 197KB

Positive Camber Bend on Trojan Duratorque Axles (Adobe PDF) 234KB