The Full Beam Duratorque 2200kg Gull Wing Low-Rider is a purpose-built trailer suspension that blends rugged load-carrying capability with a low-profile stance. Designed for serious trailers—especially boat trailers—the Gull Wing option lowers the boat and trailer profile, improving stability and ease of loading while preserving robust handling under demanding weights.

Independent, self-contained suspension — Duratorque uses a dedicated rubber cord springing medium for each wheel, so each side reacts independently to road conditions. With no cross-link between opposite wheels, you gain predictable steering and reduced sway, even on rough terrain or uneven surfaces. All components are galvanised or electro zinc plated to resist corrosion from road salt, spray, and outdoor exposure, making Duratorque ideal for frequent use in coastal or marine environments.

Key advantages of the Full Beam Duratorque 2200kg Gull Wing Low-Rider

• High-capacity full-beam system designed for single-axle applications up to 2200kg and available in a gull wing form for boat trailers, enabling a lower boat height on the trailer floor.
• Versatile braking options — choose non-braked, disc-braked, or electric drum-braked configurations to match your stopping needs and regulatory requirements. Electric drum brakes are available in 1750kg and 2200kg capacities for smoother, integrated braking performance.
• Two-piece or full-beam configurations — two-piece units fit any chassis width, while full-beam options (including gull wing) suit customers seeking a lower, more integrated profile.
• Clear load planning and compatibility — designed to pair with both single-axle and tandem setups, with a built-in guideline that tandem configurations reduce per-axle capacity by 25% to maintain safety and balance.
• Proven durability — all Duratorque components are protected by galvanising or electro-zinc plating, ensuring long service life in challenging environments and reducing maintenance downtime.

Specific models, capacities, and ordering notes

Duratorque carrying capacities range from 1000kg to 2200kg in full-beam and two-piece variants, with 3000kg options available for full-beam and drop-beam configurations. When ordering full-beam Duratorques, remember to specify your required length measurement (C & B as shown in the diagram) to ensure a perfect fit for your trailer chassis. If you’re planning tandem axles, note that the per-axle capacity is reduced by 25% to reflect the increased load distribution.

• T101046 1000kg – 1500kg capacity, Non-braked & Disc-braked
• T101055 1750kg capacity, Non-braked & Disc-braked
• T101051 1750kg capacity, Electric drum braked
• T101052 2200kg capacity, Non-braked, Disc-braked
• T101068 3000kg capacity, Non-braked, Disc & Electric-braked

Important ordering and preparation notes:

• This part is made to order with a 6–8 week lead time. Plan ahead to ensure your trailer project stays on schedule.
• When ordering, please download and fill out the Axle Order Sheet to accompany your purchase. Hub equipment is ordered separately.
• For full-beam Duratorques, supply your required length measurement (C & B) as indicated in the diagrams.
• Two Duratorque axles in tandem require capacity adjustments; each Duratorque’s per-pair rating assumes independent operation, so total capacity must be reduced by 25% when using two axles in tandem.

Use cases and ideal applications

The Full Beam Duratorque 2200kg Gull Wing Low-Rider excels in scenarios where a low trailer height matters without compromising load capacity. It’s highly suitable for boat trailers that need to sit lower in the water to improve stability and ease of launching. It’s also well-suited for rugged, road-heavy operations where independent wheel suspension provides predictable traction and smoother handling on uneven surfaces. Fleet operators and custom trailer builders will appreciate the modular options (two-piece vs full-beam, disc or electric-braked variants) to tailor the system to local regulations and payload requirements.

Practical considerations and installation guidance

• Duratorque swing arms are recommended to trail behind the trailer for optimal alignment and braking performance.
• When installed in tandem, keep tyre-to-tyre distance within 150mm and ensure a minimum of 120mm clearance between the top of the tyres and mudguards when the assembly is new and unloaded.
• If you’re fitting disc brakes or electric drum brakes, ensure compatible hub equipment is ordered separately and matched to your chosen configuration.

Why choose the Full Beam Duratorque for your trailer

Unlike traditional beam axles, Duratorque delivers a self-contained, corrosion-resistant suspension with independent wheel actuation. The gull wing, low-rider variant unlocks lower boat heights without sacrificing capacity or durability, giving you a trailer that sits lower to the ground for better stability and easier loading/unloading. The system’s modularity means you can select the exact capacity, braking method, and beam type to suit your application—whether you’re building a marine-centric trailer, a heavy-duty work trailer, or a custom transport solution.

Included resources for planning and ordering:

• Axle Order Sheet (Adobe PDF) 197KB
• Positive Camber Bend on Trojan Duratorque Axles (Adobe PDF) 234KB

With the Full Beam Duratorque 2200kg Gull Wing Low-Rider, you’re choosing a purpose-built, marine-ready trailer suspension that combines robust load capacity with a low-profile footprint and resilient protection against the elements. It’s a thoughtful, engineered solution for demanding trailers where performance and longevity matter as much as weight capacity.

Axle Order Sheet (Adobe PDF) 197KB

Positive Camber Bend on Trojan Duratorque Axles (Adobe PDF) 234KB