Flounder Drag Net Mesh 210D/18ply x 30md — Sold Per Metre

Keep your flounder gear working hard with a mesh that’s built for the job. This robust 210D/18ply green drag net mesh is purpose-made for renewing or relining flounder nets, sold by the metre so you can buy exactly what your build or repair requires. Engineered to handle repeated saltwater use while staying supple under load, it delivers the dependable pull and clean water flow you need on coastal grounds.

What makes this mesh different

• Tuned for flounder: 4-3/4" mesh opening balances efficient flounder capture with steady release of undersized fish and debris, helping reduce seabed snags and bycatch.
• Strength you can trust: Approximately 80 lb breaking strain provides the backbone for dragging, hauling, and repeated sets without stretching out.
• Saltwater-ready construction: Multi-strand cotton rag netting in 210D/18ply stands up to immersion, abrasion, and UV exposure while remaining easy to handle and tie.
• Workable, not bulky: 30md mesh width gives a reliable body to the net without unnecessary weight, maintaining a smooth, even pull.
• Low-visibility green: Blends with typical sea conditions to reduce surface visibility and keep attention on your leadline, not the mesh.
• Sold per metre: Order the exact length you need for targeted repairs, new builds, or relining existing nets—no wasted material.

Specifications that matter on the water

• Material: 210D/18ply multi-strand cotton rag netting
• Mesh opening: 4-3/4" (square stretch)
• Mesh count/width: 30md; roll length stocked to 1920 meshes for extended builds
• Approx. breaking strain: 80 lb
• Color: Green
• Sold: Per metre
• Category: Sporting Goods — Fishing Nets

Who it’s ideal for

• DIY anglers refreshing a trusted drag net at home.
• Small net makers building new sections to spec.
• Coastal crews relining worn mesh to extend a net’s working life without a full replacement.

Real-world benefits

• Fewer hang-ups, cleaner tows: Correct hole size and 30md body help the net ride true and shed weed and shell faster.
• Longer service life: Durable, saltwater-ready fibres resist fray and fatigue from constant soak-and-dry cycles.
• Consistent catch quality: Mesh geometry supports flatfish capture while reducing scale loss and net damage during haul.
• Cost control: Buy only the metres you need—ideal for spot repairs and staged rebuilds.

How to choose your length and install

• Measure first: Match your old drag panel length or count meshes edge-to-edge to determine required metres.
• Cut clean: Use a sharp blade and seal cuts with standard netting knots to prevent creep at the edges.
• Tie-in tips: Attach with proven netting knots suited to cotton/poly blends; maintain even tension along the headline and footrope to preserve the 4-3/4" geometry.

Care and maintenance

• Rinse with fresh water after each trip to remove salt and grit.
• Air-dry fully out of direct, harsh sun before storage.
• Inspect high-wear seams and corners regularly; replace metres as needed to keep your net pulling evenly.

Why buy from Action Fishing Nets

Action Fishing Nets supplies working anglers and builders with field-tested netting that’s ready for the coast. Expect fast dispatch, knowledgeable support, and materials that match the specifications listed—so your next set fishes the way it should.

Flounder Drag Net Mesh 210D/18ply x 30md — order by the metre now and keep your drag net performing trip after trip.