Half-beam Duratorque Left - 2200kg Per Pair

Half-beam Duratorque Left - 2200kg Per Pair is a purpose-built trailer suspension half designed to deliver dependable, heavy-load performance with precise alignment. This is the left-hand half of a matched pair, rated at 1100 kg per side, giving a combined capacity of 2200 kg when paired with the corresponding right-hand half. The fixed length is engineered to fit a wide range of trailer widths, and hubs are sold separately, so you can tailor your setup to your exact configuration.

What makes this Duratorque half unique

• Per-side pricing and configuration: This item is sold per side (LH) with the same part number used for the opposite (RH) half. When you pair the left and right halves, you achieve the full 2200 kg capacity.
• Left-hand orientation, ready to pair: Specifically identified as the LH half, designed to work with the corresponding RH half for a complete Duratorque suspension.
• Fixed length for versatile trailer widths: The length is fixed to align with a range of trailer widths, reducing guesswork during installation. The exact mounting centers and hub spacing are defined in the spec table and must be matched with compatible hubs (sold separately).
• Retro-fit options for older setups: Some Duratorque halves are listed as RETRO fit, meaning they’re direct replacements for very early versions, helping extend the life of legacy trailers.
• Clear load-capacity guidance: The maximum weight rating shown is for the pair. A 2200 kg per-pair cap means the trailer plus its anticipated load should be kept under this limit for safe operation.
• Hub compatibility you control: Hubs and stubs are not included and must be ordered separately. Early hub designs may not fit retro Duratorque variants, so verify hub compatibility before ordering.
• Practical sizing and weight details: Each side weighs approximately 20 kg, with the pack sold as EA (each). This helps you plan installation time and freight expectations.

Model options and compatibility notes

This listing represents the 2200 kg per-pair Duratorque half. For the matching hub/brake configurations, look for the appropriate part numbers in the Duratorque lineup—T092040LH / RH corresponds to 2200 kg variants with non-braked or disc-braked options. Early and retro-fit models have distinct hub requirements, so confirm the hub type before purchasing to ensure a seamless fit with your trailer’s braking system (non-braked, disc-braked, or electric variants are available in different part numbers).

Who this is for

• Owners of trailers that regularly carry heavy loads and need dependable, per-side suspension components.
• Fleet managers replacing aging or incompatible half-beams with a robust, left-hand Duratorque half that pairs with the right-hand counterpart.
• Collectors or operators of older trailers that require RETRO fit replacements to preserve original mounting geometry.

Installation and care at a glance

• Hub equipment is not included; order hubs/stubs separately. Ensure you select hubs compatible with the 2200 kg Duratorque half and your braking configuration.
• Not sold by the pair—each half is sold separately and priced per side. Plan for both LH and RH halves if you’re building a complete suspension.
• These products are made to order and shipped directly from the supplier. Delivery times vary, so plan accordingly and confirm lead times if you’re scheduling installation.
• Compatibility note: Early hubs may not fit retro Duratorques. If you’re replacing an older Duratorque, verify the retro-fit compatibility before ordering.

Usage tips and practical insights

When replacing halves, measure your hub face to spring/bracket mounting center to ensure you select the correct fixed length and mounting configuration. Because the 2200 kg capacity refers to the pair, always calculate your trailer’s gross weight and anticipated load to stay comfortably under the 2200 kg limit. If you’re upgrading a non-braked or disc-braked setup, match the part number and hub type to your braking system to preserve braking performance and warranty coverage.

Delivery, availability, and what to expect

These Duratorque halves are built to order and shipped directly from the supplier. They are not sold as a pair, and hubs/stubs are not included. If you’re planning a retrofit or new installation, contact us for current lead times and confirm the exact hub/brake configuration you need (non-braked, disc-braked, or electric). The right combination ensures reliable operation, precise fit, and a long service life for your trailer.