Jack Tws180dl-eq 10000lb Spprt

When your project sits between standard 8,000 lb and 12,000 lb jacks, you need a solution that blends strength, efficiency, and precise control. The Jack Tws180dl-eq 10,000 lb Spprt by Bulldog is built to fill that gap with purpose. With a dedicated 10,000 lb (4,535 kg) capacity, this square jack delivers reliable, steady support for heavy-duty setups where accuracy and speed matter—not guesswork.

Engineered for serious use, this model combines rugged steel construction with a durable gray finish and clear zinc-plated cap to resist the grind of busy shop floors and harsh environments. Its topwind handle design puts you in control, making precise lifting and positioning straightforward even in tight spaces. On a jobsite or in a shop bay, you’ll notice the balance of high capacity, manageable weight, and smooth operation that this jack delivers.

Key specifications

• Capacity: 10,000 lbs (4,535 kg)
• Type: Square jack
• Brand: Bulldog
• Part number: 180304
• Dimensions (L x W x H): 8" x 8.5" x 22" (203 x 215.9 x 558.8 mm)
• Shipping weight: 25 lbs (11.34 kg)
• Finish: Gray paint with clear zinc-plated cap
• Travel: 10" (254 mm)
• Foot plate size: 8.5" x 8" (215 x 203 mm)
• Retracted length: 18.18" (461.77 mm)
• Extended length: 38.31" (973 mm)
• Handle style: Topwind
• Material: Steel
• Attached wheels: No
• Gears included: Yes
• Handle bushing included: Yes
• Roll pins included: Yes
• Washers included: Yes

Why this jack stands out

• Sweet spot in capacity: When 8,000 lb cores feel undersized and 12,000 lb setups feel overkill, this 10,000 lb jack is the exact middle ground you need for stable, confident lifts without overpaying for capacity you won’t use.
• Stable base with practical footprint: An 8.5" x 8" foot plate provides a solid footing on uneven or soft surfaces, helping prevent tilt or shift during height adjustments.
• Longer reach without excessive length: A 38.31" extended height means you can position under tall frames or equipment and still have room to maneuver, while the 18.18" retracted length keeps it manageable in van racks or shop bays.
• Corrosion resistance where it counts: The gray painted finish combined with a clear zinc-plated cap protects critical contact points in busy environments, extending service life between maintenance intervals.
• Full accessory compatibility: With included gears, handle bushing, roll pins, and washers, you’re rarely left without essential components—setup and deployment remain straightforward from the moment you unbox it.

Ideal use scenarios

• Trailer leveling and stabilization during setup or tire changes where precise weight distribution matters.
• Heavy equipment placement and maintenance on construction sites or industrial shops where exact height and steadiness are critical.
• Rail or machinery installations that demand robust, reliable support without the bulk of higher-capacity units.
• Repairs and assemblies in workshops where the balance of capacity, speed, and effort minimizes operator fatigue.

Practical tips for best results

• Position the jack on solid ground and align the base squarely under the load point to maximize stability.
• Use the topwind handle to smoothly lift or lower the load, avoiding sudden or jerky movements that could destabilize the setup.
• Spread the load effectively across the foot plate and check for level surfaces before final positioning.
• Inspect the cap, handle, and fasteners regularly; keeping components clean and lubricated helps maintain consistent performance over time.

With its precise 10,000 lb capacity, thoughtful dimensions, and dependable Bulldog construction, the Tws180dl-eq 10000lb Spprt is not just another jack—it’s a carefully tuned tool that aligns with real-world needs, eliminating the guesswork when you need robust, reliable support fast. Whether you’re upgrading from an 8,000 lb unit or avoiding the overkill of a 12,000 lb system, this jack is designed to deliver the right balance of capacity, speed, and ease of use—every time.