Lectrotab One-Touch Leveling LED Control - provides a user-friendly control for a more enjoyable boating experience. Code CSLC-11-ATL

Lectrotab-One-Touch-Leveling-LED-Control

Features

Lectrotab is excited to introduce a new control incorporating features requested by boat owners to provide a user-friendly control for a more enjoyable boating experience.

One-Touch button to raise/lower tabs
Automatic tab position return
Completely sealed and waterproof

Features

Microprocessor-based trim tab control with LED tab position indicators
Single-button press to move both tabs up or down simultaneously
Direct replacement for Oval LED (SETR-61) controls
Automatic return to last tab position if the ignition key is turned off and back on again
Completely sealed, completely waterproof, and will not deteriorate in sunlight
Automatic tab retraction and calibration with key or accessory switch off
Easy upgrade from rocker switch style control
No external power module required for single or dual actuator per tab systems
LED tab position indicators to dim automatically in darkness and brighten in the sunlight
Adjustable programming features located on the back of the specification sheet
Operates on 12 or 24-volt dc systems

Specifications

Model Number SLC-11
Display Color Black
Number of Stations / Actuators 1 or 2 Stations / 1 or 2 Actuators/tab
Overall WidtH 3.0 INCH / 77mm
Overall Height / Thickness: 3.0" (77mm) / 437" (11mm)
Mounting Hole Cutout (Diameter): 2.25" (57mm) to 2.5" (64mm)
DC Voltage: 12/24
Fuse Size Power Input (1 Actuator per Tab): 12vdc = 15 or 20 amp 24 vdc = 10amp
Fuse Size AUX Terminal (MUST CONNECT): 1 to 2 amp

SLC Programming

Program Mode Sequence

Setting	Enter	Change setting	Exit and Save	Range	Default	Program Details
Timing	Port Bow Down	Press and hold Stbd. Bow Up/Down	Port Bow Up	4 - 12 seconds	8 sec	8 LED's = 8-second actuator. 4 LED's = 4-second actuator
Swap LEDs	Starboard Bow Down	Stbd. Bow Up/Down	Port Bow Up	LEDs opposite or same side as a button press	LEDs opposite	1 LED each side = LEDs opposite button press / 8 LEDs each side = same side
Remember the last tab setting	Port Bow Up	Stbd. Bow Up/Down	Port Bow Up	Standard retract / Remember last tab setting	Standard	8 LEDs each side = Standard / 1 LED each side = Remember last tab setting
Disable Auto Tab Retract	All Up and All Down Simultaneously for 2 seconds or longer	Stbd. Bow Up/Down	Port Bow Up	Enable / Disable	Enable	1 LED each side = Auto Tab Retract Enable / 8 LEDs each side = Auto Tab Retract Disable

Enter, Adjust, and Exit Program Mode:

Before entering program mode, 12vdc or 24vdc must be applied to Oval main power
Power to AUX terminal must be OFF (Aux is typically connected to ignition key switch or aux switch)
Press and hold button noted in Programming chart under column 'Enter' for more than 2 seconds while switching the Aux terminal switch to ON at the same time
Release the 'Enter' button and press the 'STBD BOW UP or DOWN' button to change the value
Press and hold 'PORT BOW UP' for more than 2 seconds to exit program mode
This item is shipped directly from supplier

Code SLC-11

J- 14.07.21

Stay in touch

Lectro Tab Trim Tabs

Lectro Tab Trim Tabs

Vist our retail store

Hours

Enquire Form